01) Polystyrene Panels Plain

Polystyrene Panels Plain

This panel is a plain unpainted finish with no textured paint applied.

Polystyrene ceiling panels (also known as foam ceiling panels) are a great lightweight ceiling for patios, games rooms, garages, sunrooms and enclosures.
Polystyrene panels plain are 45mm in thickness and come in a variety of lengths starting from 2400mm which also have the advantage of reducing the temperature in your room in summer and also keeping the warmth in during winter.

All panels are 1200mm wide and available lengths are 2400mm, 3000mm, 3600mm and 5000mm.

Also available in our polystyrene panel range are the 47mm thick textured panels which are designed to be supported off an aluminium T-bar section and a perimeter wall angle trim. Commonly used under metal roofs such as games rooms, patios and sheds to cut down the radiant heat. This is a very good DIY ceiling system that is all pre-finished if you use the textured finish panels.

Also available are polystyrene stick on ceiling panels are a lightweight panel designed to be adhered over existing ceilings. The panels are a nominal 600mm x 600mm x 15mm thick available in a 10 pack with a bevelled edge on each side which achieves a ‘v’ joint finish when the panels are butted together.

We also have a wide range of other types of ceiling panels including plasterboard, mineral fibre and metal pan to suit your domestic or commercial situation.

Ceilings.com.au have a great variety of ceiling products for you to choose from and you will be sure to find something to suit your needs.

Below are links to the associated aluminium T-bar sections and wall angle trim that are used with the polystyrene panels.

https://www.ceilings.com.au/products/polystyrene-panel-t-bar-surfmist-36mm-face/

https://www.ceilings.com.au/products/polystyrene-panel-t-bar-classic-cream-36mm-face/

https://www.ceilings.com.au/products/polystyrene-panel-wall-angle-surfmist/

https://www.ceilings.com.au/products/polystyrene-panel-wall-angle-classic-cream/

Below links are for the polystyrene panels with a textured paint finish applied.

https://www.ceilings.com.au/products/polystyrene-panels-white-textured/

https://www.ceilings.com.au/products/polystyrene-panels-cream-textured/

Please Note – Polystyrene Panels Plain are not a stock item and will require a lead time.

Below is a link to a water based paint primer:

https://www.dulux.com.au/paint/1step-prep/1step-prep-water-based-primer-sealer-and-undercoat/

 

$71.47$148.90

Customer Reviews

5/5

“Great range of pressed metal panels, had the best advice and also a lot cheaper than other suppliers”

5/5

“Thank you so much for the great service i recieved from Scott. See you again soon with another order. Cheers..Chrissy”